Axagon ADSA-1S storage drive enclosure HDD/SSD enclosure White 2.5"

The compact AXAGON ADSA-1S SLIMport3 adapter with USB 2.0 interface for easy connection to a 2.5" SATA disk.<br><br>A handy tool to quickly connect a laptop disk, including boot support.<br><br>Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports spindown of connected disks.<br><br>The installation can be handled even by a layman — the disk connects to the adapter and the adapter to the computer's USB port; the rest is done automatically.<br><br>Minimum dimensions and weight, along with an enclosed disc case, make the product ideally suited even for mobile use.<br><br>Features:<br>• Fully compatible with USB 2.0 and backward compatible with USB 1.1.<br>• Supports transmission rates 12 / 480 Mbit/s (full / high speed).<br>• Supports 2.5" SATA III / II / I disks of all capacities.<br>• Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).<br>• Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).<br>• The total bandwidth / transmission rate of the adapter is determined by the USB 2.0 interface used (theor. 480 Mbit/s).<br>• Supports booting from SSD/HDD connected via an USB adapter.<br>• HDD Auto Spindown support — possibility to set the interval for disk spindown when idle.<br>• HDD Auto Stop — the disk turns off after your PC spins down.<br>• Possibility to connect your device while running thanks to the Hot Plug support.<br>• Full Plug and Play support.<br>• Connection via direct USB Type A male connector on a 20 cm long cable that is permanently connected to the adapter.<br>• Power supply via USB bus.<br>• A blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking).<br>• Compact adapter dimensions 70 x 21 x 11 mm.<br>• Adapter weight of only 17 g, including a 20 cm USB cable.<br>• Simple plastic case holds 2.5" disk max. 9.5 mm high with USB adapter connected (USB cable is led out through hole in the case).<br>• For thin 7mm SSDs/HDDs foam pads are included for better fit in the case.<br>• The case can also serve to transport or store the adapter itself without the disk, with the USB cable inside the case.<br>• Case dimensions 122 x 78 x 19 mm.<br>• Case weight 40 g.<br><br>Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.<br>Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. <br><br>Package contains:<br>• USB — SATA adapter with permanently connected 20 cm long cable,<br>• plastic case for 2.5" disk and USB adapter,<br>• foam pads for 7 mm HDDs and SSDs,<br>• packed in a cardboard box with the installation procedure included.Axagon ADSA-1S. Product type: HDD/SSD enclosure. Number of storage drives supported: 1, Storage drive size: 2.5", Supported storage drive interfaces: Serial ATA, Serial ATA II, Serial ATA III. Data transfer rate: 0.48 Gbit/s. Product colour: White. USB connector type: USB Type-A